Modena Casella Series, Руководство пользователя

Страница: 8 / 42

8
Installation Instruction

This electric storage water heater should be installed on a solid
wall. If the strength of the wall cannot bear the load equal to two
times of the total weight of the water heater filled fully with water,
it is then necessary to install a special support. In case of the
hollow bricks wall, fill it with concrete cement completely, and use
the anchor fastener bolt in case of the hebel wall.
 After selecting a proper location, install the mounting bracket to a
solid wall.

The methods of installation ES XXD & ES XXDR: on the wall that is
strong enough, drill the hole with depth of approximately 45 mm.
Use the anchor fastener bolts provided along with the product for
securing the bracket (Picture 6a) firmly in the wall.
 Align the slots on the back of the water heater with the projections
on the bracket and install the water heater on the bracket until it is
locked.
 Methods of installation ES 20SR: after selecting a proper location,
determine the positions of the two installation holes that are used
for the expansion bolts with the hook (300 mm). Make two holes on
the wall with the corresponding depth by using a chopping bit with
the size matching the expansion bolts attached with the machine;
insert the
Fischer
screw (M8*80); tighten the nuts to fix firmly;
then, hang this water heater on it (see Picture 6b).
PART 3: INSTALLATION
Picture 6a
Picture 6
101 mm
69
m
m
48.5
m
m
135 mm