Modena Casella Series, Руководство пользователя

Страница: 21 / 42

21
Instructions:
a. In the sterilizer situation, if the system exit from the sterilizer
mode because of the heating temperature is reached, then it will
return to the previous mode. If it exits the sterilizer mode
because long pressing of “MODE” key, then the water heater will
enter into the booking status.
b. In the sterilizer situation, the temperature is non-adjustable and
the double “8” digits will flicker for 5s simultaneously when the
user presses “+” or “-” button, without quitting from sterilizer
process.
c. It is impossible that the sterilizer mode and the booking mode
exit at the same time. Specifically, the booking can be cancelled
by long pressing “+” or “-”button, and the system enters into the
sterilizer status accordingly. The system can also exit the
sterilizer status through long pressing the “MODE” button.
d. If the temperature has reached 80
o
C (exit the sterilizer mode),
long pressing “+” and “-”buttons simultaneously for 3s. Then, the
double “8” figures will flickers for 5s, and the system will return
to the previous state after 5s.
e. The memory is for the power outage in the sterilizer mode.
f. The sterilizer power is set for the whole container heating.
Detailed Description of Functions

Heating/Heat Preservation Function
The system could identify the heating/heat preservation state and
will light up the corresponding indicator if there is a difference
between the actual temperature and the set temperature. When
the water heater is in the heating state, the “HEATING” indicator
will lights up (bright green), while the “READY” indicator lights up
(bright red) when in the heat preservation state.