Modena Casella Series, Руководство пользователя

Страница: 22 / 42

22
The water heater could be directly heated to the set temperature
after it is just started, or the water temperature is re-adjusted.
When the set temperature is reached, the water heater will stop
heating and enter into the heat preservation state. If the difference
between the actual temperature and the set temperature is greater
than the previous temperature difference, the water will be heated
again.

Booking Bath Function
When the appliance is in the power-on state, long press “MODE”
button for 3s. Then, the booking indicator will light up. The system
will enter into booked time adjustment state and the digital display
flickers. At this moment, the user could adjust the booked time for
the heating process through pressing “+” button or “-”button.

Delay Booking Function
This water heater adopts the delay booking function. By this
function, the hot water is available after “XX” hours (user’s set
time). When in the booking (heating time programming) state, the
user cannot only adjust the booked time circularly in the range of
“01-02…-24-01” by clicking “+” button, but also adjust the booking
hours circularly in the range of “24-23…-01-24” by clicking “-
”button.
If the “+” button or the “-” button on the remote controller is long
pressed, the time can be adjusted at a rate of 5 times per second.
The operation chart of the booking function is shown in Picture 15 :