Modellbau-Regler AS-12/15RW Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 8

Modellbau-Regler AS-12/15RW Скачать руководство пользователя страница 8

.

- Operation of the product outside of model construction. So e.g. in
any test systems or when operating with power supplies.

- Too low or too high operating voltages (number of cells)

Area of use: radio controlled models

- Excessive current values

EN 55014-1/A1 55014-2 / WEEE DE 74067127

This applies in particular to :

Legal stuff

warranty conditions

We grant a 12-month guarantee on this speed controller. All further
claims are excluded. This applies in particular to claims for damages
caused by failure or malfunction. For damage to property, personal
injury and their consequences arising from our delivery or work

Tested according to the following basic standards:

This product complies with the EMC directives 89/336/EEC,
91/263/EEC, 92/31/EEC

[email protected]

CE testing

www.Modellbau-Regler.de

We accept no liability, since we are unable to control the handling and
application. We cannot provide any guarantee for damage caused by
operating conditions outside of the specified data.

If you have any questions or problems, please email us at:

Inhaber: Manja Willing
Postanschrift: Ostpreußenstr. 26 , 49525 Lengerich
Steuernummer: 327/5241/1447
USt.-IdNr.: DE234296638
Telefonnummer: 05481-3298716

«
...
6
7
8

Содержание AS-12/15RW









Отзывы:

Нет отзывов