Modellbau-Regler AS-12/15RW Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 8

Modellbau-Regler AS-12/15RW Скачать руководство пользователя страница 4

This ensures very sensitive maneuvering in reverse gear for high
driving safety and ensures a true-to-original look.

The EASY version of the AS12-15 RW always has 100% reverse
power.

safe startup with motor beep

To avoid accidents, the ESC only starts to operate when the throttle
stick on the transmitter is moved to the 0 throttle position. The ESC
then acknowledges the readiness for operation with a motor beep and
the LED lights up.

This rules out accidental starting of the motor when the battery is
connected!

During polarity reversal or when the motor stops, the ESC
automatically brakes the motor to protect it and the batteries from high
current peaks. This function is particularly important to protect the
collectors of expensive high-performance motors from damage when
the polarity is reversed at full speed.

50% reverse speed limit

(not on EASY version)

Many model builders want the motor speed to be throttled when
reversing. The ESC can be programmed to control reverse power
from 0 to 50%, instead of full 100% reverse power.

motor brake

«
...
2
3
4
5
6
...
»

Содержание AS-12/15RW









Отзывы:

Нет отзывов