If things don't want to work.
All of our products are tested here in-house to ensure that they
function correctly. We attach particular importance to the fact that no
production errors end up with the customer. In over 95% of the cases
where a product is sent to us because it does not work in the model,
the error is not in our product but somewhere else in the model. So if
a new ESC from us does not work as it should, the fault can lie in
many places and does not necessarily have to come from the ESC
itself.
CAUTION
The speed controller may only be supplied from rechargeable
batteries, operation on power supply devices is not permitted.
Therefore, in such cases, do not hesitate to send us an email to
[email protected]. We guarantee you will get a short-term
answer, often within 24 hours. In most cases we can then solve
problems without sending them in and wasting money and time. We
fully understand that not everyone is an electronics or model building
expert and we help where we can.
It is important to ensure that there are no objects in the rotating circle
of the motor when the battery is connected. The operation of this
speed controller is therefore only permitted in situations in which
property damage and personal injury are excluded. Never continue
to use a speed controller that has been damaged (e.g. due to
breakage, reverse polarity or moisture). Otherwise, malfunctions can
occur at a later point in time or as a result of subsequent errors.
recommendation and advice
Place the AS12/15RW BEC at a sufficient distance from the receiver
to prevent interference. If there is excessive heating during
operation, the cause in most cases can be found in excessive load
of the BEC.
Caution is advised here, because overloading the BEC can lead to a
drop in the supply voltage for the receiving system. It is therefore
essential to ensure that the rudders and rudder linkages run
smoothly.