Mode Machines SEQ12 Скачать руководство пользователя страница 41

Страница: 41 / 44

APPENDIX

Safety

Instructions

Before using SEQ12, please follow the instructions for use of the instrument as this will

warrant proper operation of the instrument. Due to the fact that these instructions touch

on product liability, we recommend you reading them carefully. Any claim for defect will

be rejected if one or more of the topics have not been observed. Ignoring the instruc-

tions can eventually void warranty.

• RISK OF ELECTRIC SHOCK! DO NOT OPEN OR MODIFY SEQ12.

• REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.

• TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER

(OR BACK). NO USER-SERVICEABLE PARTS INSIDE.

• The instrument may only be operated at the voltage noted on the power input on

the rear panel. Before plugging in SEQ12, always check for the correct voltage.

Before using SEQ12 in a foreign country, check whether the mains voltage is

compatible with the unit.

• When SEQ12 is not in use, disconnect the power supply from the power outlet.

This will save energy (and keep your electric bill within reason).

• Never attempt to repair SEQ12 on your own. Never open the casing. For technical

support, please get in touch with Mode Machines.

• The instrument is not to be operated outdoors (never ever!) but in dry, closed

rooms only. Never use the instrument in a moist or wet environment or near flam-

mable materials.

• No liquids or conductive materials must get into the instrument. If this happens to

be the case, the instrument is to be disconnected from mains power immediately

and examined, cleaned, and eventually repaired by a qualified person (that would

be us).

• Never expose the instrument to temperatures above +50 °C or below -10 °C.

Before powering up, the instrument should have a temperature of at least +10 °C.

Do not place the instrument in direct sun light. Do not install the instrument near

heat sources such as radiators, open fire places.

Содержание SEQ12













































Результаты поиска

Содержание SEQ12

Отзывы:

Похожие инструкции для SEQ12

Бренды по названию

Популярные бренды

Mode Machines SEQ12, Руководство пользователя

Результаты поиска

Содержание SEQ12

Отзывы:

Похожие инструкции для SEQ12

Бренды по названию

Популярные бренды