37
10
PLAYBACK FUNCTIONS AND MIDI
10. PLAYBACK-FUNCTIONS AND MIDI
The transport functions are selected by the three buttons to be found in the lower right of the
SEQ12.
START
starts the current part, the sequence-chain or the sequencer - depending on the mode being
selected. In song-mode, all sequence-chains will be played back from the beginning. A MIDI-
start-command is being transmitted.
PLAY
lights up, if SEQ12 is running. This button is used to stop and restart the playback.
RECORD
With the RECORD button enabled, received notes will be recorded to the currently selected
sequence. This will overwrite existing data in the current sequence. This works in each of the
modes.
The current sequence is the either the sequence being currently or last edited in SEQ-mode or
the sequence being currently played back in JAM- or SONG-mode.
In SONG-mode, received MIDI-data will be channeled to the selected track.
External controller-data will be recorded if the received controller-data equal the control-
ler-number as specified under CONTROL 1, 2 or MOD. Whenever RECORD is activated explicitly
in any of the views „C1“, „C2“ or „MOD“, the received controller-numbers will be used.
Find more details in chapter 9. SEQ-Mode / 9.10 MIDI-THRU“ on page 30.
PLEASE NOTE: The
RECORD
button is used as a 2nd-function-button for copy- and
shift-functions in SEQ-mode.
