19
8
SEQ-MODE
The left side of the display will still show the selected sequence, track and track-type.
On the lower right side of the display, you will find a parameter selection. The individual parame-
ters are listed below and will be described in detail later in this manual:
• Use
UP
and
DOWN
to select the parameter.
• Use
DEC
and
INC
to change or adjust the parameter value.
STEPS
: [1...16]
number of steps of a sequence
TRIM
: [0...64]
sequence-length in 1/16th notes
CLKDIV
: [1...32]
the clock divider of a sequence (multiplies the
tempo
of
the
sequence)
C1
: [0...127]
MIDI-controller-number of controller-track 1
C1 smo
: [0...1]
nables/disables smoothing of
MIDI-controller-values
C2
: [0...127]
MIDI-controller-number of controller-track 2
C2 smo
: [0..1]
enables/disables a smoothing of
MIDI-controller-values
C3
: [0...127]
MIDI-controller-number of controller-track 3
(only
for
track-type
MONO)
C3 smo
: [0...1]
enables/disables smoothing of
MIDI-controller-values
MIDI
: [1...3]
MIDI-output of track (valid for all sequences of
the
track)
CHAN
: [1...16]
MIDI-channel of track (valid for all sequences of
the
track)
TYP
: [mono, poly, drum]
track-type (valid for all sequences of the track)
THRU
: [on, off]
passes on received MIDI-notes and
controller-data
to
the
selected
MIDI-output
LINEAR
: [LINEAR, RATCHET]
enables linear- or ratchet-mode
IMPORTANT! Please note:
• The values for STEPS, TRIM and CLKDIV have to be confirmed by pressing ENTER
and will only be active from the next cycle of the sequence. This way, the sequence
always stays in sync.
• Changing the track-type also has to be confirmed by pressing ENTER.
