14
15
Touch Pads
GLIDE
Holding the touch segment labeled GLIDE and tapping the PAGE/PRESET button will step
through the portamento glide time presets. The LEDs indicate the length of the glide time
from 0s, to ~2.5s. When on page 1, the glide time will shift up, when on page 2, the glide
time will shift down.
EG
CRAFTsynth has two configurable envelope generators, one modulating the filter cutoff, one
modulating the amplitude. 16 useful presets of these are accessible through this function. To
change the envelope preset, hold the EG pad and tap the PAGE/PRESET button. The number
of active LEDs will indicate which EG preset you are on, between 0 and 15 (Displayed in
binary.)
Preset Number
EG Style
0
Snappy
1
Fade In Amp
2
Fade Out Amp
3
Fade In/Out Amp
4
Fade In Filter
5
Fade Out Filter
6
Fade In/Out Filter
7
Filter Closing Quick
8
Percussive 1
9
Percussive 2
10
Percussive 3
11
Percussive 4
12
Pad 1
13
Pad 2
14
Pad 3
15
Pad 4
When on page 1, the EG preset will shift up, when on page 2, the EG preset will shift down.
Full ADSR envelope controls for both amp and filter are configurable via MIDI CCs and the
Craft App!
Touch Pads
VOL (Headphones)
Holding the touch segment labeled VOL and tapping the PAGE/PRESET button will alter the
headphone output volume. On Page 1, the volume will increase each step and wrap around to
being quiet. On Page 2, the volume will decrease, but not wrap around to loud (So you don’t
get a shock!)
Be careful not to damage your ears when adjusting the headphone volume!
MIDI Panic
If the synth won’t stop making sound, it’s likely that you have a ‘hung’ MIDI note. This means
the synth has been sent a ‘note on’ message without ever receiving a ‘note off’.
To manually stop the sound by performing a ‘MIDI Panic’, hold just the OCT and VOL touch
pads and tap the ‘page/preset’ button.