16
17
Sound Presets
CRAFTsynth comes with 16 preset sounds, detailed in the table below. You can save your own
sound over any of these, and restore all factory presets at any time.
To load or save a sound, first enter ‘Preset mode’ by holding the PAGE/PRESET button until
the LEDs start spinning. Now you can scroll through the presets by tapping the PAGE/PRESET
button. The preset number is displayed as a pattern on the LEDs (which is the patch number
in binary for those of you who like that sort of thing!).
Once you reach the preset number you would like to
load
, simply hold the button until the
LEDs start spinning, and then let go.
To
save
over a preset, use the same process, but hold the button a bit longer, until the LEDs
Flash.
To
exit
preset mode without loading or saving, simply press nothing and wait a few seconds
until the LEDs go back to normal, indicating you are on page 1.
To
re-load
all factory-preset sounds, enter preset mode and hold all 5 touch pads.
This will
overwrite any sounds you have made!
You can send CRAFTsynth program change MIDI messages to change preset, which means you
can automate sound changes during a composition from your DAW!
Default Presets
Preset Number
EG Style
0
Space Mission
1
Corporation
2
Rave Keys
3
Big Lead
4
Alarm
5
Acid Stab
6
Spooky Organ
7
Metallic
8
Distorted Bass
9
Tinkle
10
LoFi Drum
11
Wobble Bass
12
Pulsar
13
Ambient
14
Aliens
15
Basic Sine
