Mocon Dansensor Lippke 4000 Скачать руководство пользователя страница 55

Страница: 55 / 77

P/N 330654-E 01/2018

Dansensor A/S

User Guide

Lippke 4000/4500

6. If a printer is to be used, unpack it and set it up using the provided instructions.

7. Connect one end of the interface



cable to "PC/Printer" port.

8. Connect the “Null Modem” adapter to the other end of the interface



9. Plug the Null Modem adapter into the printer.

10. Connect the power cable



to a suitable power source.

NOTE! Check to insure that all hoses are firmly and tightly connected. Please use the union
nuts provided with the system. This will help insure that all the connections are safe and
leak free.

Connection of external control device

It is possible to start and stop the Lippke device from an external source.
The 15-pin Sub-D cable must be configured as illustrated below.

"Accessory Port"

connector

15-pin Sub-D Male

Pin 3

Pin 4

Pin 5

Pin 11

Pin 12

Pin 13

Start

Stop

Safety Lock

Must be closed to
enable start of test

Содержание Dansensor Lippke 4000














































































Результаты поиска

Содержание Dansensor Lippke 4000

Отзывы:

Бренды по названию

Популярные бренды

Mocon Dansensor Lippke 4000, Руководство пользователя

Результаты поиска

Содержание Dansensor Lippke 4000

Отзывы:

Бренды по названию

Популярные бренды