Mocon Dansensor Lippke 4000, Руководство пользователя

Страница: 27 / 77

P/N 330654-E 01/2018 COPYRIGHT © Dansensor A/S
26 User Guide EN Lippke 4000/4500
How does it work?
1. If necessary adjust the restraining height - see "Adjusting the restraining height (PPC 300 II)" on page
27 for details.
2. If the lower bar

is controlled by the Lippke 4000/4500 it will already be lowered, otherwise use
the switch

to move it down, then use the switch

to move the upper bar

upwards.
3. Use knob

to slide the upper plate

away to open the restraining device.
4. Place the pouch

around the air block

as shown. Make sure that the whole front edge of the
pouch extends past the front edge of the rubber band on the lower bar

(see detail).
5. Close the restraining device.
6. Use switch

to move the upper bar

down.
7. If the lower bar

is controlled by the Lippke 4000/4500, it will automatically be moved upwards to
close the clamp around the pouch

and air block

when you start the test. Otherwise use the
switch

to move it up.
8. Perform the test.
This
type
of
equipment
complies
with
the
applicable
ANSI/UL
Standard
for
Safety
, including
Electrical
Fire
and
Shock
Hazards
This
type
of
equipment
has
been
tested
against
EN
983
and
EN
ISO
12100-2.
A copy
of
the
certicate
is
available
at
the
Manufacturer
.
4
1
5
6
8
7
3
2
Lo
we
r Ba
r
Up
/ A
uto
Do
wn
PPC 300II
Lippke
a MO
CO
N co
mp
an y
Do
wn
Up
per
Ba
r
Up