Mobridge DA-G2.Pro MOST25, Руководство пользователя, Страница: 9 / 12

C H A N N E L E Q C O N N E C T E D
0.00Hz Default Preset 01
DELETE CLEAR
FREQ
0.00Hz 0.00Hz
MAG
0.00Hz 0.00dB
GAIN
0.00Hz 0dB
Q-FACTOR
0.00H 0.01 0.00Hz 0.01
Q-L/R
C O N F I G U R A T I O N
12dB
50Hz 100Hz 500Hz 1KHz 10KHz 5KHz 20KHz
6dB
0dB
-6dB
-12dB
-18dB
-24dB
0.00Hz Output Channel 3 Output Mapping
Time Mapping
Input Mapping
Left Right
Sink 1 Sink 2
Sink 3 Sink 4
FRONT LEFT TWEETER
0.00ms 0.00ms
MONO INPUTS
Sink 1
Sink 2
0.00Hz
0 dB
0.00Hz
0 dB
Sink 3 Sink 4
0.00Hz 0 dB 0.00Hz 0 dB
Gains
1
3
5
11
7
9 10
2
4
5
12
8
0.00Hz
1.4 ms
Delay
C H A N N E L E Q
0.00Hz Default Preset 01
C O N F I G U R A T I O N
FIRMWARE UPDATE
12 Channel Professional DSP
DA-G2.PRO MOST25
Serial Number: N/A
Firmware Version: 02.01.00
Vehicle Type: AUDI MM13G/MM13G+
Download Online Updates Automatically
Firmware Update Options
Check Online for Updates
Manual Updates Only
Check for Updates Automatically
FACTORY RESET
RESTART
RESTORE
C O N N E C T E D
Install Guide
Device Support
D A - G 2 . P R O M O S T 2 5
User Guide
FIG 02
Update Page
UPDATE
ONLINE
UPDATES
If performing an online update, make sure the
‘Check Online for Updates’ option is ticked and
then press the ‘Firmware Update’ button. This
will automatically check for the latest software
update for the connected device and begin the
upgrade process.
If performing an offline update, make sure the
‘Check Online for Updates’ option is unticked and
then press the ‘Firmware Update’ button. This will
open a window where you can select the new MOST25
DA firmware file to update to and the update
procedure will begin.
Once the update has completed, the MOST25 DA unit
will reboot and start the system again. Sometimes it
is a good idea to let the car sleep after the firmware
upgrade as some MOST systems do not like ECU’s
resetting on the MOST bus.
This configuration screen will allow you to configure
the channels for the correct mapping of your
particular system.
First select a speaker from the image of the vehicle
in the top left corner, then select an output mapping
from the drop-down menu in the middle of the
screen to select the channel output you have
connected for that particular speaker. Repeat this for
each speaker and its corresponding output channel.
SPEAKER MAPPING
Once the MOST25 DA unit is connected to the mObridge DSP application, you will see the below screen (figure 03) .
C H A N N E L E Q C O N N E C T E D
0.00Hz Default Preset 01
DELETE CLEAR
FREQ
0.00Hz
0.00Hz
MAG
0.00Hz
0.00dB
GAIN
0.00Hz
0dB
Q-FACTOR
0.00H
0.01
0.00Hz
0.01
Q-L/R
C O N F I G U R A T I O N
12dB
50Hz 100Hz 500Hz 1KHz 10KHz 5KHz 20KHz
6dB
0dB
-6dB
-12dB
-18dB
-24dB
0.00Hz Output Channel 1
Output Mapping
Time Mapping
Input Mapping
Left Right
Sink 1 Sink 2
Sink 3 Sink 4
0.00ms 0.00ms
MONO INPUTS
Sink 1 Sink 2
0.00Hz 0 dB 0.00Hz 0 dB
Sink 3
Sink 4
0.00Hz 0 dB 0.00Hz 0 dB
Gains
1
3
5
11
7
9 10
2
4
5
12
8
0.00Hz
1.4 ms
Delay
MUTE
FRONT LEFT TWEETER
FIG 03
Configuration Page
CONFIGURATION
SETTINGS
SELECTED
SPEAKER
M O S T 2 5 D A S E R I E S
/ /
G U I D E PA G E 1 6 M O S T 2 5 D A S E R I E S
/ /
G U I D E PA G E 1 7