Mobridge DA-G2.Pro MOST25 Скачать руководство пользователя страница 10

FIG 04

Mono Input adjustments

When running a component speaker system with 
a passive crossover, only select one of the 
speakers in the cluster. It is not important which 
speaker is chosen, as this is only the mapping 
stage. Crossover settings will allow for correct 
settings for this type of speaker system.

Next, you will need to allocate the appropriate 
input mappings to each speaker. For each speaker, 
simply select the speaker image in the top left 

corner, and then click the appropriate ‘Input Mapping’ 
options for each speaker. If multiple input 

mappings are selected, these sources will be 

combined and summed.

MONO INPUTS 

After mapping your speakers, you can then adjust 

the mono input gains and delay using the “Mono 
Inputs” panel which will be displayed on the 
right-hand side of the configuration tab 

(figure 04)

MONO INPUTS

Sink 1

Sink 2

0.00Hz

0 dB

0.00Hz

0 dB

Sink 3

Sink 4

0.00Hz

0 dB

0.00Hz

0 dB

Gains

0.00Hz

1.4 ms

Delay

PHONE, NAV, PDC AND CHIME GAIN ADJUSTMENTS

This can be used to independently adjust the gains of the input sinks such as phone, navigation, PDC, and 

chimes. Each manufacturer has different configurations for their mono inputs so please reference the 

table below when adjusting your phone, nav, pdc or chime gains. 

DELAY

The delay slider can be used to fine-tune the mono input processing delays in your mObridge device. This 

can help alleviate echo issues in certain vehicles while using your mObridge device to play audio on phone 
calls. The delay will be active on all mono inputs.

V E H I C L E  

P H O N E  

N AV  

P D C  

C H I M E S  

V O I C E

  BMW 

Sink 1  

Sink 2 

Sink 4  

Sink 3 

Sink 2 (same as Nav)

 

Audi 

Sink 1  

Sink 2 

NA 

NA 

Sink 3

  Porsche 

Sink 1  

Sink 2 

NA 

NA 

Sink 3

  Mercedes 

Sink 1  

Sink 2 

NA 

NA 

Sink 3

 Landrover 

Sink 2 

Sink 2 (same as Tel) 

Sink 3 

Sink 4 

Sink 2 (same as Tel)

  Jaguar 

Sink 2 

Sink 2 (same as Tel) 

Sink 3 

Sink 4 

Sink 2 (same as Tel)

Aston Martin 

Sink 1  

Sink 2 

Sink 3  

Sink 4 

Sink 2 (same as Nav)

  Toyota 

Sink 1  

Sink 2 

Sink 4  

Sink 3 

Sink 2 (same as Nav)

 

Mini 

Sink 1  

Sink 2 

Sink 3  

Sink 4 

Sink 2 (same as Nav)

M O S T 2 5   D A   S E R I E S  

/ /

  G U I D E

PA G E   1 8

M O S T 2 5   D A   S E R I E S  

/ /

  G U I D E

PA G E   1 9

Содержание DA-G2.Pro MOST25













Отзывы: