Mobridge DA-G2.Pro MOST25, Руководство пользователя, Страница: 8 / 12

LED STATUS
L E D L E D S TAT U S I N D I C AT I O N
A (Leftmost) Flashing Audio Processing
B Solid MOST25 Link
C (Rightmost) Solid Master Sync
GRAPHICAL INTERFACE OPERATION
The mObridge DSP Graphical Interface can be downloaded from www.mobridge.us and can be used in
both online and offline mode. However, in order to ‘Map the channels,’ you will need to be connected to
the MOST25 DA with power connected too. Offline mode allows you to configure Graphic EQ settings and
store them for later fine-tuning in the car if desired. We recommend all tuning be done with a ‘Live’
system because this way you can hear all changes being made in real-time.
SOFTWARE UPDATE
The mObridge MOST25 DA series can be software
updated via its USB connection and use of the
mObridge DSP software interface that runs on
Windows and Mac PC’s. The mObridge DSP GUI
can be downloaded from support on our website
www.mobridge.us/support
Once the GUI has been installed, the latest MOST25
DA software can be applied. The GUI can perform
software updates either using the online updater,
or you can download the latest software for an
offline update at
www.mobridge.us/support
The mObridge MOST25 DA unit will need to be
connected in the car and powered up for the unit
to be updated. Once it has connected to the DSP GUI
the user will be presented with the following screen
(figure 01) . Please note that certain features are
only available in the DA-G2.Pro MOST25 model, if
you have a DA1 Digital Pre-Amp MOST 25 or a
DA-G2.Standard MOST25 these features may not
be available.
C H A N N E L E Q C O N N E C T E D
0.00Hz Default Preset 01
DELETE CLEAR
FREQ
0.00Hz
0.00Hz
MAG
0.00Hz
0.00dB
GAIN
0.00Hz
0dB
Q-FACTOR
0.00H
0.01
0.00Hz
0.01
Q-L/R
C O N F I G U R A T I O N
12dB
50Hz 100Hz 500Hz 1KHz 10KHz 5KHz 20KHz
6dB
0dB
-6dB
-12dB
-18dB
-24dB
1
3
5
11
7
9 10
2
4
5
12
8
0.00Hz Output Channel 3
Output Mapping
Time Mapping
Input Mapping
Left Right
Sink 1 Sink 2
Sink 3 Sink 4
0.00ms 0.00ms
Sink 1 Sink 2
0.00Hz
0 dB
0.00Hz
0 dB
Sink 3 Sink 4
0.00Hz 0 dB 0.00Hz 0 dB
Gains
0.00Hz 1.4 ms
Delay
MONO INPUTS
MUTE
FRONT LEFT TWEETER
FIG 01
MOST25 DA is connected to the DSP GUI
CLICK ON
‘CONNECTED’
Once the MOST25 DA is connected via the GUI we can just click on the ‘Connected” in the to right-hand
corner and this will bring us to the update page as seen on the following page (figure 02) .
M O S T 2 5 D A S E R I E S
/ /
G U I D E PA G E 1 4 M O S T 2 5 D A S E R I E S
/ /
G U I D E PA G E 1 5