Mobridge DA-G2.Pro MOST25, Руководство пользователя, Страница: 6 / 12

SYSTEM LAYOUT | DA-G2.STANDARD & DA-G2.PROFESSIONAL
Channel 1
From other MOST
Components (if applicable)
12v (
+
)
Ground (
-
)
Amplifier turn-on
Channel 2
Channel 3
Channel 5
Channel 7
Channel 8
Channel 9
Channel 10
Channel 6
Channel 4
Aftermarket
Amplifier
Fiber Optic
Analog RCA
From OEM radio MOST
or amplifier (removed)
FOR DA-G2 INSTALLATIONS,THE FACTORY AMPLIFIER
MUST BE DISCONNECTED (IF EQUIPPED)
WIRING HARNESS
01
For MOST25 DA installations, the installation
process changes depending on whether the
vehicle has an amplifier, and also if it has
MOST fiber optic presently installed.
a For vehicles with a fiber amplifier, the factory
amplifier must be removed and the MOST25
DA unit can be installed in its place. Connect
the OEM fiber previously connected to the
amp, directly into the MOST25 DA unit.
b For vehicles without an OEM amplifier or
MOST fiber, use the supplied optic extension
and connect from the fiber port behind the radio
to the MOST fiber port on the MOST25 DA.
c
For vehicles without an OEM amplifier but still
equipped with MOST fiber, disconnect the fiber
from the radio and connect it to the supplied
‘T’ piece harness. Connect one side of the ‘T’
piece harness to the MOST25 DA and then
connect the remaining plug back to the radio
unit to add the MOST25 DA to the MOST loop.
* NOTE: with options (b) and (c), you must
reprogram the system to use the external
amplifier for the MOST25 DA to operate
properly. Use the mObridge MOST25 OBD
programmer to reprogram the system.
02 Connect the wiring harness to the POWER
socket on the MOST25 DA.
03
Connect the desired audio output(s) to the
MOST25 DA: (Note: both Analog and Digital
outputs can be used simultaneously).
a If using analog RCAs for the signal to the
amplifier, connect the provided RCA output
harness to the ANALOG OUT port on the
MOST25 DA.
b
If using the digital TOSLINK for the signal to
the amplifier, connect a TOSLINK cable to the
TOSLINK OUT port on the MOST25 DA.
REMOTE WAKEUP
The MOST25 DA kits come with remote wake-up
functionality. The remote wake-up wire (Blue) is
used to power on the preamp with the vehicle’s
accessory power at the same time as the rest of
the audio system. We recommend this be installed
by a professional installation technician.
INSTALLATION GUIDE
M O S T 2 5 D A S E R I E S
/ /
G U I D E PA G E 1 0 M O S T 2 5 D A S E R I E S
/ /
G U I D E PA G E 1 1