Mobotix Cloud Bridge, Руководство пользователя

Страница: 41 / 102

Motion Detection
The MOBOTIX Cloud VMS includes an integrated motion detection system. This system can be adjusted in
many ways and can have as many different regions as you need.
Master Motion Sensitivity : This is the default level of motion sensitivity that is applied to the entire image.
If you have created a region on the image, the region’s motion sensitivity can override the Master Motion
Sensitivity for that region.
Master Motion Object Size : The motion detection system looks for objects moving through the image. The
size selection can be small , medium , or large . Large objects will be approximately 10 % of the full image size.
Small objects will take up about 1 % of the full image.
Note
You can see the results of changes to these settings by clicking on Apply . The red motion boxes that appear
do not reflect object size. To see if the object size is triggering recording, look for the green circle that indic-
ates Recording in the upper right corner of the video.
Regions/Alerts : You can create an unlimited number of regions and alerts. To do so, press the New Region
button.
Name : The name of the region you are going to edit or create.
Disable Motion : Checking this box will disable all motion detection in the region. This is used to block out
trees or extraneous areas from causing unnecessary recording.
Motion Override : The Master Motion Sensitivity and the Master Motion Object Size settings can be over-
ridden for the region. The values specified for the region will be used instead of the master values for any
objects that are in the region.
Alert : Check this box to activate alerts for any motion detected in the region. Alerts can have a specified
period when they are active. For example, you could have motion alerts only when the office is closed or at
night.
Alert When : This sets the time to trigger the alert for this region. The default is 24 hours , but choices are
Work hours , Non-Work hours , and Custom .
Re-arm : This is where the alert can be set to re-arm and ready to be triggered again.
n
Immediate : The alert is re-armed immediately. This creates the highest number of alerts.
n
After x minutes : The alert will not be re-armed for the number of minutes entered. For example,
selecting After and
15
will cause the alert to wait 15 minutes before another alert is triggered, no mat-
ter whether motion is detected in the region or not.
n
After quiet for x minutes : The alert will not be re-armed until there is no motion detected in the
region for the number of minutes entered. For example, selecting After quiet for and
5
will cause the
alert to re-arm only after five consecutive minutes without motion in the region. This helps to limit
the number of alerts.
n
Max Per Hour : This will limit the number of alerts to the number entered in a 60-minute period regard-
less of how many times motion is detected in the region. This helps to limit the number of alerts.
Alert Who : This indicates the users of the system that should receive the alert for this region.
Camera Settings
Configuring Cameras
41 / 102