manualshive.com logo in svg

MOBILUS C-MR BT, Руководство пользователя, Страница: 5 / 16

Поделиться
Скачать
MOBILUS C-MR BT Скачать руководство пользователя страница 5

4. ENTRY INTO THE MODULE PROGRAMMING MODE

Press and hold a programming button on module 

MOBILUS 

C-MRBT

 above 5 sec until the connected actuator executes one 

sequence of noticeable and audible micro movements down / up 

confirming the entrence of the receiver in the PROGRAMMING 

MODE.

WARNING!

 If within 20 seconds no programming will be 

performed, the MOBILUS C-MRBT radio module automati-

cally exits from the programming mode. Connected actuator 

executes one sequence of noticeable and audible micro 

movements down / up.

1 s.

BEEP! BEEP!

PILOT 2

1 s.

b

5 s.

5. RESETOWANIE MODUŁU DO USTAWIEŃ FABRYCZNYCH

1.  Enter the PROGRAMMING MODE for the 

MOBILUS C-MRBT

 module - 

Fig. 5a

.

2.  In the PROGRAMMING MODE, press and hold the programming key above 5 seconds - 

Fig. 

5b

. The module is removed from the HomeKit network and all remote controls previously 

loaded into the module are deleted from its memory, as confirmed by a single white LED 

flash.

Fig. 5 

a

b

5

Содержание C-MR BT

















Отзывы:

Нет отзывов