MOBILUS C-MR BT, Руководство пользователя, Страница: 12 / 16

4. CHANGING THE DIRECTION OF THE TUBULAR MOTOR
1. If you press the UP button on the remote control and the armor goes down, change the
direction of rotation of the drive. At the same time, press and hold:
a ) on the remote control COSMO | HM, | HB, | G3+, | WT9, | WT buttons STOP and DOWN
- Fig. 4b ;
b ) on the remote control COSMO | HT, | H24,| H1, | H5, | G, | W1, | W7 buttons DOWN and UP
- Fig. 4c ;
c ) on the remote control COSMO | HCT UP and F3 buttons
- Fig. 4d ;
until the drive executes one sequence of micro down / up moves.
2. Check the UP / DOWN buttons
- Fig. 4e .
Fig. 4
a e
b
c
d
5. REPEATER FUNCTION
SIGNAL REPEATER - This feature allows you to expand the radio control area. The MOBILUS C-MRBT
module with the repeater function enabled receives signals from the controller or actuators and
passes them forward. Thanks to the furthest located receivers which are not within the controller can
receive and transmit information through modules located indirectly. Turn on the repeater function:
1. Press the STOP and UP buttons simultaneously on the MASTER until the connected actuator executes
one sequence of noticeable and audible micro movements down / up, confirming entry into the
PROGRAMMING MODE.
12