MOBILUS C-MR BT, Руководство пользователя, Страница: 14 / 16

7. BIDIRECTIONAL - INFORMATION ABOUT THE POSITION OF THE BLIND
MOBILUS C-MRBT transmits information about the end position and intermediate position
blinds to remote controls. The mode is switched on automatically - there is no possibility of
deactivation.
8. BI-DIRECTIONAL - OVERLOAD INFORMATION
MOBILUS C-MRBT transmits information to remotes about overload - for example, it may be
related to a housing lock occurring at the time of raising or lowering. Mode is factory-setted - it
is possible to turn off.
Enable / disable of overload detection:
1. At the MASTER remote control press and hold the STOP and UP buttons simultaneously
until the connected actuator performs one sequence of noticeable and audible micro
movements down / up confirming the receiver input into the programming mode
- Fig. 8a .
2. On the MASTER , press the STOP button and hold until the actuator connected to the
MOBILUS C-MRBT module will perform two sequences of noticeable and audible micro
movements down / up. Overload detection active
- Fig. 8b
.
3. To stop the overload detection, repeat step 1. Then press the STOP button on the MASTER
control and hold until the actuator connected to the MOBILUS C-MRBT module will perform
1 sequence of noticeable and audible micro moves down / up
- Fig. 8c
.
Fig. 8
b
MASTER
a
2x
c
14