Overview
Dual Band EnCOVER VE™ Instant Coverage Solution User Manual
5
The following provides a description of the front panel LEDs.
Table 2: VCU LEDs Description
LED
Description
PWR Indicates
whether
the VCU receives power:
Green - Power OK
Disabled - No power received by VCU
ACT VCU
activity
LED:
Solid Green – during initialization
Blinking Green – normal system operation
Solid Orange – VCU is faulty
Fast Blinking Green – User activated
VCU Identify on this VCU
VAP Status (one
LED per port)
Indicates the status of the connected unit (VAP or VCU)
Disabled – no power supplied to corresponding unit
Blinking Green - associated unit is initializing
Solid Green - associated unit is in normal operation
Solid Orange - associated unit is faulty, or connected unit is not managed
(due to mismatch type, VoIP phone, VCU connected to a slave VCU etc.)
Fast Blinking Green – User invoked “identify” command on the
corresponding unit
Off – when there is no VAP or VCU connected to this port.
RF (one LED per
Service)
Indicates the status of connected RF capacity source:
Green – Relevant only when VCU is the Master and indicates normal RF
level
Orange - Relevant only when VCU is the Master and indicates that the RF
level is either too low or too high, or that the service has been turned off
by the user.
Off - When VCU is a slave unit
VCU/VCH
Indicates the status of the connection to the Master VCU:
Off – when in Master mode
Blinking Green – During Attachment process with upper VCU Master
Solid green - when in Slave (IF-IF) mode and adjustment alarm is clear
PWR
ACT
VAP Status
LEDs
VCU/VCH LED
Service
LED
Service
LED
