Mobile ECO MINEY, Инструкция по эксплуатации и перечень запасных частей

Страница: 5 / 13

6. TROUBLES SHOOTING
No Trouble Clause Fixing Methods
1 The forks can not be
up the max height.
- The hydraulic oil is not enough. -Pour in the oil.
2
The forks can not be
lifted up.
-Without hydraulic oil.
-The oil has impurities.
-The nut (G104) is too high, keep the
pumping valve open.
-Air come into the hydraulic oil.
-Fill in the oil.
-Change the oil.
-Adjust the nut(G104) or
screw (318) (see item 3.4)
-Banish the air.(see item 4.2)
3 The forks can not be
descended.
-The piston rod (328) or pump (322)
is deformed resulting from partial
loading slanting to one side or
over-loading.
-The fork was kept in the high
position for long time with piston rod
bared to arise in rusting and jamming
of the rod.
-The adjusting nut (G104) or screw
(318) is not in correct position.
-Replace the piston rod (328)
or pump (322).
-Keeping the fork in the
lowest position if not using,
and pay more attention to
lubricate the rod.
-Adjust the nut (G104) or
screw (318) (see item 3.3)
4 Leaks -Sealing parts worn or damaged.
-Some part cracked or worn into small.
-Replace with the new one.
-Replace with the new one.
5 The fork descends
without the release
valve worked.
-The impurities in the oil cause the
release valve to be unable to close
tight.
-Some parts of hydraulic system is
cracked or bored.
-Air has come into the oil.
-Sealing parts worn or damaged.
-The adjusting nut (G104) or screw
(318) is not in the correct position.
-Replace with new oil.
-Inspect and replace the
parts.
-Banish the air. (See item
4.2)
-Replace with the new one.
-Adjusting the nut (G104) or
screw (318). (See item 3.2)
NOTE: DO NOT ATTEMP TO REPAIR THE PALLET TRUCK UNLESS YOU ARE TRAINED
AND AUTHORIZED TO DO SO.