Mobiky Steve 16", Руководство пользователя

Страница: 34 / 52

. SETTING OFF :
1- Turn the ignition key fully to the right (2 notches to the right).
2- Set off while pedalling normally. The motor starts up only when the user pedals, and only up to a
maximum speed of 25 kph.
3- Electrical assistance is automatically shut off as soon as pedalling stops and as soon as the
brakes are activated.
4- Make sure you are not taken by surprise by the slight acceleration that occurs when the motor
engages.
5- Select your desired level of assistance.
If the electronic components of the control unit malfunction, the system may trip out (all the red
diodes on the display unit light up except the fi rst one) : In this case, remove the battery for a few
seconds, then switch the ignition on again.
. INSTRUMENT PANEL :
1- Power level selection :
This function allows you to get used to the acceleration provided by the motor and
to limit energy consumption.
You have a choice of three different levels of assistance as shown on the control
panel :
- I = low.
- II = medium.
- III = high.
2- Battery charge indicator light :
As the battery discharges, the 4 diodes dim in turn from the green symbol towards
the red symbol. When only one diode is illuminated, the battery will shortly be
completely discharged.
3- 6 kph pedestrian mode switch :
Press the 6 kph button in order to use «pedestrian» mode.
1
POWER LEVEL
2
CHARGE
INDICATOR
3
PEDESTRIAN
MODE
ELECTRIC ASSIST PEDAL CYCLE (EAPC)
Conforms to safety requirements in accordance with standard NF-EN 15194
A supplement to the user manuals for CITY AND TREKKING BICYCLES (EN 14764).
1
2
3
34