Mobiclinic Virgo, Инструкция по эксплуатации

Страница: 12 / 80

ES
Instruction Manual VIRGO
EN ES
FR IT DE PT NL
SWE
PL DK
12
Under the seat
1. Seat adjustment lever:
- Handlebar clearance adjustment: pull up on the lever on the front of the seat to adjust the handlebar clearance.
- Rotation adjustment: press the lever backwards to rotate the seat; press it forwards to lock it in the desired position.
- Armrest adjustment: Loosen the two thumbscrews to adjust the width between the armrests. Tighten them again to
secure them in the desired position.
Rear body
1. Rear Cover: Protects batteries from damage.
2. Anti-tip wheels: Helps keep the scooter from tipping over.
3. The Free-Wheeling Lever: It will let you change the Mode of your scooter (Neutral Mode or Drive Mode). The Neutral
Mode (N) will let you move the scooter without energy, you will be able to push it, whereas the Drive Mode (D) will let
you drive the scooter and immobilize it when you want to park it.
You will find some stickers next to the lever, they will help you to know the Mode of your scooter.
If you would like to change from Neutral Mode to Drive Mode, you must turn off the scooter. After changing the Mode,
you will be able to turn on again your scooter.
CIRCUIT BREAKER (L) FREE-WHEELING LEVER (L1)
If scooter’s circuit system malfunctions or over loaded, the circuit system will automatic shut down the power to ensure
driver’s safety. After the power is off, press button (L) to regain 8 power. If you want your scooter to be immobilized,
there is a lever in back side (L1)
The Free-Wheeling Lever (L1) will let you change the Mode of your scooter (Manual Mode or Automatic Mode). The
Manual mode will let you move the scooter without energy, you will be able to push it, whereas the Automatic Mode
will let you drive the scooter and immobilize it when you want to park it. You will find some stickers next to the lever,
they will help you to know the Mode of your scooter. If you would like to change from Manual Mode to Automatic Mode,
you must turn off the scooter. After changing the Mode, you will be able to turn on again your scooter.
ASSEMBLING YOUR SCOOTER
First, lift the lever (I) to disengage the pin. There are three levels, so you can adjust the steering fore-aft to the most
comfortable angle. Release lever (I) and ensure the pin is fully engaged to lock the steering column in position. In
order to set the seat (K), lift lever (J) upward to disengage pin. Simultaneously, rotate seat (K) (or lift to disassemble the
seat) to the most comfortable angle. Release lever (J) and ensure the pin is fully engaged to lock the seat in position
(379mm/390mm/410mm).