Mobiclinic Virgo, Инструкция по эксплуатации

Страница: 16 / 80

Instruction Manual VIRGO
EN ES FR IT DE PT NL SWE PL DK
16
Flash Description Meaning
1 Low Battery The batteries are running low.
•Recharge the batteries
2 Low Battery Fault Battery charge is empty.
• Recharge the batteries.
3 Battery voltage
too high Battery voltage is too high. This may occur if overcharged &/or traveling
down a long slope.
• Turn the scooter power off then on again
• If traveling down a slope, reduce your speed.
4 Current limit
time-out The motor has been exceeding its maximum current rating for too long.
This may be due to a faulty motor
• Check the motor and associated connections and wiring.
• Turn the controller off, leave for a few minutes and turn back on again.
5 Brake fault Either a park brake release switch is active or the park brake is faulty.
• Check if the lever is in Automatic Mode (D).
• If this flash code does not appear until the throttle has been moved out
of neutral, check for a short in the park-brake circuit.
• If this flash code appears at power-up, check for an open circuit in the
park-brake circuit.
• Check the park brake and associated connections and wiring
6 Out of neutral at
power-up The Throttle is out of neutral when turning the controller on.
• Ensure the throttle is in neutral when turning the scooter on.
• The Throttle may require re-caVirgotion.
• Check the its associated connections and wiring.
7 Speed Pot Fault The throttle, speed limit pot or their associated wiring may be faulty.
• Check the throttle and speed pot and associated connections and wiring.
8 Motor Voltage
Fault The motor or its associated wiring is faulty.
• Check the motor and associated connections and wiring.
9 Other error The controller may have an internal fault.
• Check all connections & wiring.
TROUBLESHOOTING
To check the Self-Diagnostic Warning Light, turn on the key and count the number of flashes