Mobeye ThermoGuard TwinLog CML2255, Руководство пользователя портала

Страница: 18 / 28

17
time, no alarm is sent. For each temperature input a delay time can be set. The time can
be set between 0 and 999 minutes.
As default, the temperature delay time is set to 0 minutes.
5.6 ALARM DELAY TIME
The input delay time defines the time that the input is triggered before an alarm is
initiated. If the input returns to the non-alarm status within the delay time, no alarm is
sent. The time can be set between 0 and 999 seconds. As default, the input delay time
is set to 1 second.
5.7 INPUT TYPE
The input type defines the character of the inputs IN1 and IN2. This can be Normally
Open (NO) or Normally Closed (NC). If an input is set to NO, the alarm will be triggered
as soon as the terminals of the input are closed. If the input is set to NC, the alarm is
triggered when the connection between the input terminals is broken. The default input
type is set to NO.
5.8 INACTIVE TIME
The “inactive time” defines the time an input is not active after an activation. During the
inactive time, no new alarm message will be sent. Only when the input returned to the
non-alarm status, gets activated again and remains active, an alarm will be sent yet
after the inac
tive time. If the time is set to “0” (minutes), the input will be active again
immediately after returning to the non-alarm status. The time can be set between 0 and
60 minutes. As default, the inactive time is set to “0”.
5.9 ALARM REPEAT TIME
In order to emphasize the urgency of the alarm messages, all alarms can be repeated.
As long as the input has not returned to the inactive status, the portal notifications will
be repeated after the ‘alarm repeat time’. In each repeated temperature alarm message
the actual temperature is included. The repeat interval can be set between 0 and 999
minutes. As default the alarm repeat time is set to 0 minutes.