Mobeye ThermoGuard TwinLog CML2255, Руководство пользователя портала

Страница: 14 / 28

13
3. OPERATIONAL MODUS
3.1 SWITCHING ON/OFF
After the previous steps, the Mobeye CML2255 is ready for use and switched on
automatically. It can be switched on and off by the user-defined time schemes or the
button on top. By default this button is ‘locked’, to prevent that the unit can be switched
off by mistake. This can be changed by choosing the value “OFF” for the setting
“BUTTONLOCK” (see 5.18). After unlocking the button, the system can be switched on
and off pressing it for one second.
When the unit is switched off, the green LED is off. When the unit is on, the green LED
blinks once every 3 seconds (battery-powered)
or stays ‘on’ continuously (in case of an
external power supply).
In the disarmed status the Mobeye CML2255 will not send alarm notifications. The
functions automatic arming and sending test and
‘low battery’ messages, are still active.
If powered externally (GSM is open), switching can be done via SMS commands:
SMS command to switch on: CODE ARM
SMS command to switch off: CODE DISARM
example: 1111 ARM
The status can be requested via SMS command CODE STATUS?.
3.2 CONFIRMATION OF THE ALARM MESSAGE
When the system is triggered it will send alarm notifications. First a message is sent to
the Mobeye Internet Portal, which will be forwarded to the alarm contacts. Next the
device will directly call the alarm telephone numbers. When you pick up the phone, you
will hear beeps. It is possible to confirm the phone call by answering the phone and
pressing any key. The other alarm numbers will not be called afterwards.