Mobeye ThermoGuard CM2200, Руководство пользователя

Страница: 11 / 32

10
3. USE OF EXTERNAL POWER SUPPLY AND INPUTS
3.1 USE OF EXTERNAL POWER SUPPLY
Although the Mobeye ThermoGuard is designed to run on batteries, it is possible to use
an external power supply. In this mode the module is always connected with the GSM
network and therefore always in program mode. When the power fails, the batteries take
over and a power failure message is sent. The module continues operating albeit in the
low power mode. This means the GSM module switches off and only establishes
network connection when it needs to send an alarm notification, test message or low
battery alert.
Connect the external power adapter (or
any
other regulated 12VDC power supply) to the
power input of the connector (press on the green
pins to connect the wires):
-
V+ (black lead with white stripe) to “+”
-
Ground (black lead) to “-“
3.2 USE OF THE INPUTS
It is possible to connect two external sensors
to the inputs. As a standard reaction after a
triggered input, the Mobeye ThermoGuard
sends an SMS text message to the preset
numbers and calls these numbers.
Insert the 2 wires of an external sensor
through the hole of the enclosure to the
inside part and next in the two connectors of