Mobeye MS100BK, Руководство по установке

Страница: 5 / 23

3
1. INTRODUCTION
The Mobeye MS100BK is an easy to install measure, control and alarm module that will
send alerts using the built-in GSM communication module. It has inputs for sensors and
signals. The Mobeye MS100BK can also switch external devices connected to (e.g. by SMS
text message). To use the Mobeye MS100BK you will need a SIM-card. This can be a
prepaid or post-paid card.
The Mobeye MS100BK has following features:
•
In case one of the inputs is activated by a sensor, the Mobeye MS100BK sends an alarm
SMS text message and calls the phone numbers as programmed. The SMS message
contains the text ‘Mobeye alarm 1’ or ‘Mobeye alarm 2’.
•
As soon as the inputs leave the alarm status, an SMS text message is sent to the set
telephone numbers containing the text such as ‘Mobeye Input 1 OK’ or ‘Mobeye Input 2
OK’.
•
If the sensor and/or the input remain in the alarm status, the Mobeye MS100BK repeats
sending the SMS alarm message every four hours.
•
With just batteries (no external power supply) the module remains in low-power mode,
which means that the GSM network connection is disabled and only established when it
needs to send an alarm, test message or "battery low" message.
•
When the batteries need to be replaced, the Mobeye MS100BK
sends a ‘battery low’
SMS text message to the administrator.
•
If an external power supply is used and a power failure occurs, the Mobeye MS100BK
sends a
‘power failure’ SMS text message and calls the phone numbers as programmed
by the user. When the power is restored, the Mobeye MS100BK
sends a ‘power
restored’ SMS text message to the numbers.
•
If an external power supply is used, the outputs can be switched by an incoming SMS
command from an authorised telephone number.