Mobeye MS100BK, Руководство по установке

Страница: 16 / 23

14
REACTION
Each trigger can initiate a maximum of 3 reactions out of the following list:
Reaction Command Remark
Switch Output 1 O1ON, O1OFF,
O1TGL Toggle means the output switches each time the
action is executed, regardless the current status
Switch Output 2 O2ON, O2OFF,
O2TGL
Send SMS SEND:text Max. 20 characters. An alarm SMS contains the
identification text and the text as defined here. The text
is also stored as TEXTy, where y stands for the action
rule number.
Call CALL The unit calls the set alarm numbers. The receiver will
hear a 2-tone signal and can co
nfirm by pressing ‘1’.
7.3 PROGRAMMING ACTION RULES
Send following SMS commands in following format:
CODE TRIGGER:REACTION1,REACTION2,REACTION3
• Do not forget the space between CODE and the TRIGGER.
• The Mobeye MS100BK will play a short melody to indicate a successful configuration. In
case of a wrong command, a long beep will sound.
7.4 TIME-BASED ACTION RULES
It is possible to let the action be daily performed at a certain time. The time is the trigger.
To program a time-based action, include the time in the action rule, in following way.
CODE TIME:hhmm:REACTION
7.5 LIST OF PROGRAMMED ACTION RULES
A list of programmed action rules, the Action Rules List (ARL), can be requested by sending
following SMS to the unit.
Request programmed action rules:
CODE ARLREPORT?
Example:
Switch output 2, call a
nd send SMS text ‘Pump failure’ after a triggered input2:
1111 IN2:O2ON,CALL,SEND:Pump failure
Example:
1111 ARLREPORT?
Example :
Switch output 1 after a triggered input1:
1111 IN1:O1ON
Example:
1111 TIME:1115:O1ON