Mobeye CM2500, Руководство пользователя портала

Страница: 12 / 32

11
3.4 CONNECT AN EXTERNAL EMERGENCY BUTTON (OPTIONALLY)
It is possible to connect external panic buttons
to the inputs. As soon as the external button is
pressed for at least one second, the behaviour
will be similar as when the on/off button was
pressed.
Insert the 2 wires of an external sensor
through the hole in the enclosure and insert
them in the two connectors of input 1 (press on
the green pins for connecting the wires). It
does not matter which wire is connected to which connector.
A second button can be connected to input 2.
As default the inputs are programmed as Normally Open (NO) contacts. This means
the inputs are triggered if the input is closed for at least 1 second. In case the
contact is Normally Closed (NC), please refer to paragraph 5.4. If you require the
sensor to be activated for a shorter or longer period before triggering an alarm, refer
to 5.6.