Mobeye CM2500, Руководство пользователя портала

Страница: 18 / 32

17
5. POSSIBLE SETTINGS
The Mobeye Panic Button has many setting options that influence the behaviour of
the module. If connected on the Mobeye Internet Portal, the settings are prepared in
the portal (see chapter 4). If your own SIM card is used, programming is done via
SMS commands (see chapter 6).
5.1 ALARM PHONE NUMBERS
In the event of an alarm, the Mobeye Panic Button can call 5 telephone numbers
(TEL1… TEL5). It is possible to confirm a call by picking up the telephone and
pressing any key. The following numbers will not be called.
When using your own SIM card, it is mandatory to set at least one number (on
TEL1). The TEL1 ... TEL5 are then used for telephone calls and / or text messages
from the unit.
This is not mandatory when using the Mobeye Internet Portal. If no telephone
numbers have been entered, the notifications will only be sent to the portal and
forwarded by SMS and / or e-mail from there.
Note: the (unlimited number of) contacts who receive SMS / e-mail may be different
from the numbers programmed on TEL1 ... TEL5.
5.2 CALL ON/OFF
Even if the alarm telephone numbers are set in the options, the calling process can
be suppressed. By turning off the CALL, the unit will only send the notification via
textual messages. The default value is set to "ON".
5.3 SMS ON/OFF
This setting is only relevant when using your own SIM card: the Mobeye Panic
Button alerts after an alarm on the inputs with a call and an SMS. It is possible to
turn off the SMS (OFF). As a factory setting, the SMS is set to "ON".