Mobatime DTS 4020.timebridge, Монтаж и инструкция по эксплуатации

Страница: 29 / 94

© MOBATIME 29 / 94 801299.00
Time Source Priority configuration
DTS 4020.timebridge Moser-Baer AG
====================================
TIME SOURCE PRIORITY
1 Source Priority1 PTP
2 Source Priority2 NONE
3 Source Priority3 NONE
4 Source Priority4 NONE
10 Priority Mode manual
98 Return and save
99 Return and discard changes
Enter desired menu number>
Path: 2 Configuration

2 Time handling

1 General source setting

Source configuration
(1-4)Source PriorityX 0=NONE, 1=PTP, 2=SyncE, 3=Freq, 4=NTP
10 Priority Mode 0 = auto: In this mode the device makes the priority of the
sources and not the user. In this case the rating of the
source is the priority.
1 = manual: The configured priorities are used to check
which source has to be active.
Time Source Stratum configuration
DTS 4020.timebridge Moser-Baer AG
====================================
TIME SOURCE STRATUM
1 DTS stratum (0=auto, 1-15=fix) 0
2 Stratum limit for synchalarm 12
3 Stratum TO (1-16) source fail 999h
4 Stratum change source fail default
98 Return and save
99 Return and discard changes
Enter desired menu number>
Path: 2 Configuration

2 Time handling

1 General source setting
1. DTS stratum: 0 = Stratum is automatically calculated according to
the time source.
1-15 = Stratum DTS 4020 is set by means of the
description in the table in chapter “8.4 ”
2. Stratum limits for alarm: Limits for alarm “Time source stratum lost“ (1-16)
3. Stratum TO (Timeout):
Duration of stratum change 1 to 16 in the case of time loss (1-999h),
e.g. 24 hrs

stratum counts up from 1 to 16 within 24 hrs.
4. Stratum change source fail:
default = Default Stratum change behaviour
immediate = Stratum is decreased by one step immediate after
“failure of time source” has been detected