Mobatime 122031, Монтаж и инструкция по эксплуатации

Страница: 56 / 124

© MOBATIME 56 / 124 801214.10
Network Interface 1 – Page 1
DTS 4160.grandmaster Moser-Baer AG
====================================
NETWORK GENERAL LAN 1 PAGE 1/2
1 IPV4 configuration
2 IPV6 configuration
3 Network interface config auto
4 Host name (Device name) dts4160
5 Domain name
6 IPv4 static routing
98 Return and save, ENTER for next part
99 Return and discard changes
Enter desired menu number>
Path: 2 Configuration

5 Network

1 LAN 1
1. Configuration of IPv4 parameters
2. Configuration of IPv6 parameters
3. Set network interface: Auto, 1000/100Mbit, half, full duplex.
4. Set host name.
Notice:
A host name must always be configured.
Host names and their format are described in the Internet standards
RFC 952 and RFC 1123:
Domains and host names may only contain letters (capitals or small
letters) and numerals ("0-9"). In addition, the minus sign ("-") may also be
used, as long as it is not at the end.
Everything else is not permitted!
5. Set domain e.g. test.org
6. Define up to 2 static routing destinations for IP1 and IP2
View of the current network state in Menu: ‘1 Status’

‘6 Info network config.'
Notice:
After modifying the IP or the DHCP mode the menu is always closed.
Notice:
DHCP on/off, each change of this setting will result in a restart of the NTP
server!
Notice:
For the operation of a Multicast communication (NTP and Time Zone
Server) the configuration of a gateway is mandatory . The gateway can
be set manually or by using DHCP. If no gateway is available, the own IP
address can be used.
Notice:
Only one DNS server should be configured (IPv4 or IPv6).
Notice:
Modifications to the network must be coordinated with the network
administrator!