MOBA MOBA-Matic MMC-1000, Руководство пользователя

Страница: 52 / 172

52
Operating and display elements, operating modes
Fault indicators
When all LEDs of the LED-arrows of the digital
controller flash simultaneously, then there is a
malfunction.
Often these are malfunctions which are not real
defects, rather a notice or reference to an attempt for
operation under unauthorised conditions.
Information about trouble-shooting can be found in
the description of the work with the various sensors
as well as in the section for
“Assistance with
malfunctions
”.
= LED flashes
Operating modes
Manual (manual mode)
The tool will be traversed directly in
“manual” operating mode
with the up/down buttons of the digital controller.
Automatic
The setpoint value for the tool will be amended in the
“Automatic”
operating mode with the up/down buttons of the digital controller.
If a difference results from the comparison of the measured value
and the set setpoint value, then digital controller will control the
outputs independently itself until this difference is compensated.
Flashes
Semi-automatic (1)
In the operating mode
“Semi-automatic”, the up/down buttons of
the digital controller can be utilised to amend the setpoint value
for the tool. There is no activation of the tool, since the outputs
are locked in this operating mode.
(1) This mode occurs when the optional operator variant with semi -automatic is
activated from your MOBA dealer (also refer to the next page) or when the MOBA -
Matic system has been locked with the aid of the
“External Hand” function.