MOBA MOBA-Matic MMC-1000, Руководство пользователя

Страница: 124 / 172

124
Operation
8.6.2 Controlling with the Dual-Sonic
Switch controller
with the
Auto/Manual button
to the
“Manual”
operating mode.
The
“AUTO”
function lamp is off.
Select Dual-Sonic
sensor as
described.
Align the tool to the
working position for
the zero adjustment
with the UP/DOWN
buttons on the
controller or the
operator unit on the
machine.
Align the sensor as
described in the
section for
assembling and
setting up over the
reference position.
Press the Enter
button.
The actual setpoint
value will be
acquired as the
setpoint value.
Press the Enter
button an hold for
approximately 2
seconds.
Actual value and
setpoint will be set
to
“0.0”.
Switch controller with
the Auto/manual key
into the
“Automatic”
operating mode. The
function lamp
“AUTO”
is on.
The controller stops
the tool on the set
value.
Use the UP/DOWN
buttons to amend
the setpoint value
in automatic mode
to be therefore able
to acquire
corrections.
5) 6) 4)
3) 2) 1)