MOBA MOBA-Matic MMC-1000, Руководство пользователя

Страница: 169 / 172

Declaration of conformity
169
Definition of terms / Glossary
Term Definition
Working point Point (distance, grade or angle) for which the actual value and
setpoint are equal and no control is required.
CAN-Bus The CAN-Bus (Controller Area Network) is defined as a
system for serial data transmission. It was developed for the
networking of control units in the car industry to reduce the
cable loom (up to 2 km per vehicle) and to reduce, and
secure, the data transfer.
Actual value The currently measured value of a sensor, e.g. the distance of
a grade sensor to a reference or the measured slope from a
slope sensor.
Minimum pulse Minimum triggering pulse which is required to traverse a
hydraulic cylinder in the smallest possible way.
Maximum pulse Trigger pulse which defines the maximum permissible working
speed of a hydraulic cylinder.
Zero adjustment The current measured value of the grade sensor will be
assigned the value of
“0.0” and at the same time acquired as
the setpoint for the controller.
Offset A constant, systematic error a variable or a measured value
(e.g. an offset when the slope sensor cannot be assembled
absolutely parallel to the lower edge of the tool).
Prop band The area above and below the dead band in which a
“metered” triggering of the output is executed. The length of
the pulses is therefore dependent on the control deviation.