MLB-G1102 Wireless Terminal User Manual
12
Rev 1.1
3.2
Left side view (DC Jack & Industry connector)
Figure 4: DC and Industry connector for MLB-G1102
The interfaces and indicators for MLB-G1102 are as follows:
Name
Description
Function
DC
DC
Input Power:+5V~+32V
Terminal
Block
PWR(V+,V-)
•
I
nput Power:+5V~+32V
•
Pin #1 is V+
•
Pin #2 is V-
•
When use DC for input, the output power of TB is same as input
power
Do Not
use DC & PWR to be the input power at the same time, it
may cause damage to the equipment.
Relay
External Relay:max+40V
DI1(I1,COM_1)
Pin #5 is +
Pin #6 is -
•
I1:external 12V~+48V
•
COM_1:common grand
•
Pin #5 is +
•
Pin #6 is -
DI2(I2,COM_2)
Pin #7 is +
Pin #8 is -
•
I2:external 12V~+48V
•
COM_2:comman grand
•
Pin #7 is +
•
Pin #8 is -
Reset
Reset
•
1-click to reboot MLB-G1102.
•
Double click to set MLB-G1102 into configuration mode.
•
Long press over 5 seconds to reset MLB-G1102 to default.
Table 4: Interfaces and Indicators Description of MLB-G1102
