MLB-G1102 WIRELESS TERMINAL User Guide
21
Rev 1.1
MISC
Set variables and Get Relay/DIO status in MISC page.
Item
Serial Switch
Select RS232/422/485 mode by drop-down list.
Set Baud-rate
Set baud-rate by drop-down list.
Parity Bit
Set Parity Bit by drop-down list.
Stop Bit
Set Stop Bit by drop-down list.
HW Flow Control
-Check to enable HW Flow Control.
-User can set DTR/RTS in normal mode.
Get DIO1
Click to get the status of DIO1
Get DIO2
Click to get the status of DIO2
Relay
Click ON/OFF to enable/disable relay
Send to SMS/Send to Server
Select the receiver (SMS or Server) when the status of DIO
changed.
