2
These instructions should be read carefully and retained after installation by the end user for
future reference and maintenance.
These instructions should be used to aid installation of the following products:
WGULED / WGULEN / WSGULED / WHGULED
GENERAL INSTRUCTIONS
SAFETY
INSTALLATION
• Installation of this luminaire should only be carried out by a qualified electrician or competent
person to the latest Building and current IEE Wiring Regulations (BS7671)
• Please isolate mains prior to installation/maintenance
• Check the total load on the circuit (including when this luminaire is fitted) does not exceed the
rating of the circuit cable, fuse or circuit breaker
• Please note the IP (Ingress of Protection) rating of this luminaire when deciding the location for
installation
• This product is Class I and requires an earth
• This product is IP67 rated
• This product is dimmable dependant on lamp
• Using the plastic sleeve as a template, cut a suitable hole in the mounting surface as per the
cut-out details ensuring that it does not infringe with electrical cables or water/gas pipes
(see Fig 1).
• Provide power to the required point of installation. Suitable IP rated junction boxes should be used
where required
• Ensure the power source is via an RCD or an RCBO
• With the Allen key provided, remove the Allen screws fixing the bezel to the body
• Remove the bezel, gasket and glass (see Fig 2)
Fig 1
95mm
