11
IDL225-LM Series
Long Travel Industrial Linear Stages
5.0 —
Stage Installation
5.1
Unpacking
The IDL225-LM stage will be delivered in packaging that is designed for
safe transport. Attached to the body of the stage are lifting rings for safe
removal from packaging. It is recommended to carefully lift and move the
stage from packaging using these rings.
CAUTION
Using a beam, lift the lifting rods vertically, as slings with single point
attachment (triangular shape) will induce side and bending loads to the
IDL225-LM stage, especially for configurations where the weight is
higher than 132 lb (60 kg).
NOTE
Allen keys are supplied for CHc M6 and CHc M8 screws as well a 13-mm
open-end wrench for dismantling the spacer tubes.
The stage will come with a control report that indicates performance of
your stage within guaranteed specifications. These measurements were
taken in a controlled environment and flat mounting conditions.
5.2
Setting Up
The IDL225-LM stage is equipped with lifting rings and a plate to lock the
carriage during transportation. To safely unpack the stage, follow the
instructions below.
CAUTION
Remove lifting and locking
systems before using.
A104
4F
0 - EDH036
1
En
10
5
0
—
0
2/
20
