MKS Microvision2 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 50

MKS Microvision2 Скачать руководство пользователя страница 11

MKS Instruments UK Ltd

Microvision2 Hardware Manual – SP101015.102 August 2010

11

4. Rear Panel Connections

The rear panel incorporates all the connections required by the Microvision2

RGA.

Details on these connectors and their use can be found in this section.

4.1 X-Trip

The X-Trip connector requires a special locking, stereo jack plug, which is supplied with the unit. Do not
use a standard 3.5mm jack plug. Replacements are available from MKS Instruments if required.

The external trip feature is used to protect the filaments and electron multiplier from exposure to high
pressures. It allows an independent total pressure gauge or signal from a vacuum control system to be
connected to the Microvision2 as protection against accidental damage.

It is the most effective of the trips available and we would always recommend its use.

The external trip input can be driven in three ways:

1. Uncommitted relay contact

«
...
9
10
11
12
13
...
»

Содержание Microvision2



















































Отзывы:

Нет отзывов