Ax34601a_e_A5.doc / Feb-06
Page 11 / 20
Menu
Selection
Text
Description
GAin
Maximum output swing of the analogue output
Setting 1000 results in an output swing of 10 volts
or 20 mA.
Setting 200 reduces the swing to 2 volts or 4mA
OFFSEt
Zero output of the analogue output
Setting 0.000: Output generates 0 volts
respectively 0 mA with zero in display.
Setting 5.000: Output generates already 5 volts
respectively 10 mA with zero in display
5.2.
Operational Parameters
After completion of the basic set-up we are ready to set the operational parameters.
To start the menu, keep the ENTER key down for at least 3 seconds.
The operational menu will now appear in the display.
Parameters to set the analogue output appear at the end of every menu and are absolutely
identical with all modes. Therefore these parameters are described only once and separately
under section 5.2.4.
To exit the parameter menu you can either press the ENTER key for 3 another seconds again, or
just wait for automatic exit via time-out function.
Where your keypad is locked by the access code locking, every key action will first display
If this is true, you can unlock the keys by pressing the keys in the sequence
within 10 seconds. If not, the unit would automatically return to the normal display function.
5.2.1.
Operational parameters with single channel mode
Menu
Selection
Text
Description
Input A
Input range A
in U
Voltage input 0 - +/-10 V
in i0
Current input 0 – 20 mA
in i4
Current input 4 – 20 mA
Start A
Start value which the unit will display with a zero
input signal of 0 volts or 0/4 mA
End A
End value which the unit will display with a full
scale input of 10 volts or 20 mA
«
«
«
