MKS 1253D, Инструкция по эксплуатации

Страница: 29 / 73

Chapter Two: Installation How To Unpack the 153/1253 Unit
19
Chapter Two: Installation
How To Unpack the 153/1253 Unit
MKS has carefully packed the Type 153/1253 unit so that it will reach you in perfect operating
order. Upon receiving the unit, however, you should check for defects, cracks, broken
connectors, etc., to be certain that damage has not occurred during shipment.
If you find any damage, notify your carrier and MKS immediately. If it is necessary to return the
unit to MKS, obtain an ERA Number (Equipment Return Authorization Number) from the MKS
Service Center before shipping. Please refer to the inside of the back cover of this manual for a
list of MKS Calibration and Service Centers.
Do not discard the protective plastic caps that are placed over the valve ports for shipment.
Leave the protective caps on the valve until it is installed in the system and replace the caps when
you remove the valve from the system.
Unpacking Checklist
Standard Equipment:
•
153D/1253D Unit
•
Power cord
Optional Equipment:
•
Electrical Connector Accessories Kit, 153D-K1 or 1253D-K1 (contains a mate for the
electrical connector should you choose to make your own cable)