MK-100
Revision 1/01, Effective Date January 23, 2001
Page 10
SAFETY
PRODUCT SPECIFICATIONS:
The MK-100 is a versatile Tile Saw. Operated and used according to this manual, the MK-100 will provide
years of dependable service.
General Description:
The MK-100 Tile Saw is engineered as a tabletop or stand mounted wet tile saw. The saw includes a powerful
115v totally enclosed capacitor start GE motor with a thermal protective overload. The saw is capable of
cutting tile up to twenty (20) inches in length, or diagonal cutting tile up to fourteen (14) inches. The saw can
cut an object three and one-half (3-1/2) inches thick in one pass.
Motor Specifications:
Motor specifications for the MK-100 are listed in Table 2 below.
Voltage
115 v
Overall Amperage
13.4 a
Motor Only Amperage
12.8 a
Frequency
60 Hz
RPM
3450 rpm
Horse Power
1.5 hp
Weight
97 lbs
Table 2
Thermal Overload Protection:
The motor is protected by a thermal overload equipped with a manual reset.
Blade Capacity:
The MK-100 uses a ten (10) inch (254mm) diameter, wet cutting continuous rim, MK Diamond blade with a
one-sixteenth 1/16 inch (15.875 mm) cutting width and a five-eighths (5/8) inch (15.875 mm) arbor.
Tile Types:
The MK-100 can cut a variety of tile types including Porcelain, Terracotta, Marble, Quarry and Slate, or almost
any other non-ferrous material.
NOTE:
The MK-100 is not designed to cut plastic or ferrous (metals) material.
