Weld Control Selector Guide - Page 21
The PA-G1 Control (P/N 005-0264) is connected to Powcon power supplies as follows:
1. Connect the
red
and
green
contactor leads from the Control to pins B & E of the 17 pin amphenol
plug;
red
to
B
and
green
to
E
. Place the contactor in the CLOSING CONTACTS position (see
Appendix for contactor information).
2. Connect the
black
wire from the Control to pin
S
and the
white
wire to pin
J
.
3. Add a
jumper
between pins
P
and
t
.
Note: Use in GMAW (CV) position.
Powcon
The WC-1 Weld Control or the Cobramatic Cabinet is connected to Powcon power supplies as follows:
1. Connect the
black
and
white
contactor leads extending from the WC-1 or Cobramatic
to pins 8 & 9 of the 14-Pin AMP plug;
black
to
8
and
white
to
9
. Place the contactor
in the CLOSING CONTACTS position (see Appendix for contactor information).
2. Plug the 115VAC plug extending from the WC-1 or Cobramatic into a standard wall
outlet or cut off the plug and wire it to the 14 pin;
black
to pin
1
,
white
to pin
2
and
green
to pin
3
.
3. Add a
jumper
between pins
10
and
14
.
4. Tape off WC-1
red
and
green
leads and turn off Posa Start switch as
Posa Start is not used.
Note: Use in Mig or CV position.
The PA-G1 Control (P/N 005-0264) is connected to Powcon power supplies as follows:
1. Connect the
red
and
green
contactor leads from the Control to pins 8 & 9 of the
14 pin AMP plug;
red
to
8
and
green
to pin
9
. Place the contactor in the
CLOSING CONTACTS position (see Appendix for contactor information).
2. Connect the
black
wire from the Control to pin
4
and the
white
wire to pin
5
.
3. Add a
jumper
between pins
10
and
14
.
Note: Use in GMAW (CV) position.
P-3
P-1
P-2
14-Pin aMP
Powcon P/n’s
aMP P/n’s
Plug
250011-001
206044-1
Cord Clamp
206070-1
Pins (7 req.)
---
66099-2/-3
14-Pin aMP
Powcon P/n’s
aMP P/n’s
Plug
250011-001
206044-1
Cord Clamp
206070-1
Pins (7 req.)
---
66099-2/-3
Note: Newer Powcon units use a 14-Pin similar to Miller. See section
M-3 or use the 14-Pin Control - P/N 005-0261.
17-Pin
amphenol
Powcon
P/n’s
amphenol
P/n’s
Plug & Pins
930014-101
3106A20-29PW
Cord Clamp
930014-301
3057-1012
Boot
930014-405
MS3420-12
Содержание ELECTRIC ARC WELDING EQUIPMENT
