Weld Control Selector Guide - Page 22
The WC-1 Weld Control or the Cobramatic Cabinet is connected to Powcon power supplies as follows:
1. Connect the
black
and
white
contactor leads extending from the WC-1 or Cobramatic to pins 8 &
9 of the 14-Pin AMP plug;
black
to
8
and
white
to
9
. Place the contactor
in the CLOSING CONTACTS position (see Appendix for contactor
information).
2. Plug the 115VAC plug extending from the WC-1 or Cobramatic into
a standard wall outlet.
3. Add a
jumper
between pins
10
and
14
.
4. *Connect the
red
and
green
leads extending from the WC-1 to
the power supply positive (+) and negative (-) terminals of the
power supply;
red
to
positive (+)
and
green
to
negative (-)
.
5. Place the Weld Process Switch to "SMAW" (stick) position.
6. The Posa Start must be used; see WC-1 or Cobramatic
owner's manual for Posa Start operation.
*See Appendix for Posa Start information.
Powcon
P-4
The WC-1 Weld Control or the Cobramatic Cabinet is connected to Powcon power supplies as follows:
1. Connect the
black
and
white
contactor leads from the WC-1 or
the Cobramatic to pins B & E of the 17-Pin amphenol plug;
black
to
B
and
white
to
E
. Place the contactor in the
CLOSING CONTACTS position (see Appendix for contactor
information).
2. Plug the 115VAC plug from the WC-1 or the Cobramatic into
a standard wall outlet.
3. *Connect the
red
and
green
leads extending from the WC-1
to the power supply positive (+) and negative (-) terminals of
the power supply;
red
to
positive (+)
and
green
to
negative
(-)
.
4.
Jumper
pins
t
and
P
together.
5. Place the Weld Process Switch to "SMAW" (stick) position.
6. The Posa Start must be used; see WC-1/Cobramatic owner's manual for Posa Start operation.
*See below for Cobramatic Posa Start information.
Note: Newer Powcon units use a 14-Pin similar to Miller. Use section
M-3 or use 14-Pin Control - P/N 005-0261
14-Pin aMP
Powcon P/n’s
aMP P/n’s
Plug
250011-001
206044-1
Cord Clamp
206070-1
Pins (7 req.)
---
66099-2/-3
P-5
17-Pin
amphenol
Powcon
P/n’s
amphenol
P/n’s
Plug & Pins
930014-101
3106A20-29PW
Cord Clamp
930014-301
3057-1012
Boot
930014-405
MS3420-12
Содержание ELECTRIC ARC WELDING EQUIPMENT
