MK Diamond Products MK-4018HY Скачать руководство пользователя страница 30

Страница: 30 / 32

ACCESSORIES, ORDERING AND RETURN INFORMATION

Ordering Information
You may order MK Diamond products through your local MK Diamond distributor or, you may order
direct from MK Diamond.

NOTE: There is a $25.00 minimum order when ordering direct from MK Diamond. All purchases must
be made using VISA or MasterCard.

When ordering direct from MK Diamond, please have the following information ready before calling:

• The Model Number of the machine

• The Serial Number of the machine

• Where the saw was purchased and when

• The Part Number for the part(s) being ordered

• The Part Description for the part(s) being ordered

All parts may be ordered by calling toll free to

(800) 421-5830 or (310) 539-5221 and asking for

Customer Service. For technical questions, call

(800) 474-5594 or (310) 257-2845.

Return Materials Policy
To expedite the service relative to the return of a product purchased through MK Diamond, please
observe the following:

NOTE: When returning items, they must have been purchased within the previous twelve (12) months.

• Have the Model Number of the saw

• Have the Serial Number of the saw

• Have the location of where the saw was purchased and when

• Contact Customer Service for approval to return the item(s)

• Follow the packaging instructions in the following section

• Ensure your item(s) are prepaid to the destination

For returned items, call toll free to

(800) 421-5830 or (310) 539-5221 and asking for Customer

Service. For technical questions, call

(800) 474-5594 or (310) 257-2845.

Packaging Instructions

• Remove the Blade Guard and Support Angle Assembly

• Dry the saw before shipping

• When packing, include the following: MK-4000, Diamond Blade and Blade Guard

• Package the part in its original container or one of comparable size

• Ensure all parts are secured in the packaging to prevent moving

Authorized Service Centers
For quicker repair time, you may contact MK Diamond Customer Service, toll free at

(800) 421-5830

(310) 539-5221 for the Authorized Service Center closest to you. For technical questions, call

(800) 474-5594.

MK-4000 SERIES

CONTACT AND LIMITED WARRANTY

Содержание MK-4018HY

































Результаты поиска

Содержание MK-4018HY

Отзывы:

Бренды по названию

Популярные бренды

MK Diamond Products MK-4018HY, Руководство оператора

Результаты поиска

Содержание MK-4018HY

Отзывы:

Бренды по названию

Популярные бренды