manualshive.com logo in svg

Mizuho MOT-VS500DK, Руководство оператора

Поделиться
Скачать
Mizuho MOT-VS500DK Скачать руководство пользователя страница 8

4

2

Safety precaution

(2) Control unit

WARNING

• 

Do not forcibly pull on the control unit cord.

• 

Do not subject the control unit to strong shocks. The control unit may get 
damaged.

(3) Base

CAUTION

Do not place any objects on the base. An object may get 
caught and the operating table may get damaged.

(4) Power cord

WARNING

• 

Do not place any heavy objects on the power cord.

• 

Do not roll over the power cord with a castered device.

• 

Do not forcibly pull on the power cord.

• 

Do not place any objects in the place where the power 
cord is to be unplugged from the medical grade outlet, 
which would obstruct it from being unplugged.

Power cord

(5) Installation of the operating table

WARNING

• 

Do not install the operating table 

on an uneven floor.

• 

Do not place a pad under the 
base for raising the operating 
table. The operating table may tip 
over resulting in injury.

Uneven floor

Pad

„

„

Patient's position during surgical operation

WARNING

• 

Make sure to always securely attach the mattresses to the operating table so that 
they do not come off.  
The mattresses may come off, and the patient may get injured.

• 

Position the patient's body 1 cm (0.39 in) or more away from the metal side rail. The 
side rail may produce high temperatures, which may result in a burn injury. 

„

z

Positioning the patient

Follow the steps below to position the patient.

1. 

Attach the mattresses to the tabletop.

2. 

Put the patient on the mattresses.

3. 

Position the patient according to the purpose of the surgical operation.

Содержание MOT-VS500DK































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды